Products - Discovery 4 Slider / Step

Our Discovery 3 and 4 'Hybrid' Rock Sliders / Side Steps bring together the best of two worlds.

Discovery 3/4 users often fit side steps to enable easy access to and from the car - this is a problem when going off road as they bend, break and cause snagging.

The Rock Slider part is made from 5mm steel plate with 50mm tube. This is backed up by an additional 4 x  40mm tube supports. The joints are TiG welded for a smooth OEM finish.

Rock Sliders are an essential purchase for any off road use. They prevent damage to the underside sill of the vehicle and allow for safe passage over rocky and rough terrain.

The other benefit of this Slider/Step Combo is that the outer 'bar' pushes away small trees and scrub from the bodywork of the vehicle. They can also be used to 'slide' around thick trees when grip is minimal.

These units require no additional drilling just unscrewing and unclipping of the plastic OEM parts. Fit should take 15 minutes each side.

Quick glance guide:

• 5mm Steel & 50mm Steel Tube Section
• CNC Machined and Pre Cut
• Stainless Steel Bolt Fixings
• Full  Pictorial Installation Guide
• Full installation and Technical Backup
• Stock Coming Soon

** Click here to view updated Photographs on our Flickr Stream**

50mm bar can be used as a side step with the addition of our 'anti slip' tape.

Call now to place your order on 01252 689586 or email sales@gnvp.co.uk

Disclaimer; These items are designed and constructed to fit existing UNDAMAGED sills. If you vehicles Sills are damaged in any way, shape or form, then there may be a chance  that the correct fit and finish will not be achieved. GNVP cannot be held responsible for this. Goods may be returned to us if this is the case, undamaged and at the  purchasers cost. We suggest that any potential purchasers check the condition of their existing sills prior to purchasing by removing the OEM plastic parts as damage can occur to the metal sills underneath without being noticeable until the plastic is removed. It has also been noted that some customers vehicles may not have the requisite number of pre tapped holes in their sills. Although we have fixed these to our own D3’s with 11 fixings, we don’t expect you would have any issues if there are a couple missing each side. You could of course, drill and tap additional holes if required. These products are designed for off  road use only at speeds lower than 15 mph.