Products - Discovery 3 Transmission Plate

The Transmission Plate is a new product for the Discovery 3 and has been designed with our co workers in Spain, S & E Products. Made from 6mm 5083 grade Aluminium and Water Jet cut to a precise finish it will protect the underside of the Transmission and allow the car to slide over objects. This plate bolts directly into existing holes and bulkheads already in the chassis, using the standard Land Rover and two additional fixings.

Quick glance guide:

• 6mm 5083 Marine Grade Aluminium
• Water Jet Cut and Polished
• Full  Pictorial Installation Guide
• Full installation and Technical Backup
• Stock Item

Call now to place your order on 01252 689586 or email sales@gnvp.co.uk

Disclaimer; These items are designed and constructed to fit existing UNDAMAGED sills. If you vehicles Sills are damaged in any way, shape or form, then there may be a chance  that the correct fit and finish will not be achieved. GNVP cannot be held responsible for this. Goods may be returned to us if this is the case, undamaged and at the  purchasers cost. We suggest that any potential purchasers check the condition of their existing sills prior to purchasing by removing the OEM plastic parts as damage can occur to the metal sills underneath without being noticeable until the plastic is removed. It has also been noted that some customers vehicles may not have the requisite number of pre tapped holes in their sills. Although we have fixed these to our own D3’s with 11 fixings, we don’t expect you would have any issues if there are a couple missing each side. You could of course, drill and tap additional holes if required. These products are designed for off  road use only at speeds lower than 15 mph.