GN Vehicle Protection
Products

 

GNVP

 

84 Oxenden Road,

Products - Discovery 3 Rock Sliders

 

D3 SillRock Sliders (Sill Protectors) are made from 6mm 5083 Aluminium and come completely machined and drilled ready to fit.

 

An essential purchase for any off road use. They prevent damage to the underside sill of the vehicle and allow for safe passage over rocky and rough terrain. Our ‘Stealth’ range attaches to your vehicle using 11 mounting points on the side and underneath. When the car doors are closed they are almost unseen, but you have the piece of mind that your car sills are safe from damage.

 

These units require no additional drilling just unscrewing and unclipping of the plastic OEM parts. Fitting should take 15min each side.

 

Quick glance guide:

  • 6mm 5083 Marine Grade Aluminium
  • CNC Machined and Pre Cut
  • Stainless Steel Bolt Fixings
  • Full  Pictorial Installation Guide
  • Full installation and Technical Backup
  • Stock Item

 

D3 SillD3 Sill

 

Rock Sliders D3/D4 £220.00
Powder Coating Matt Black £25.00
UK Delivery on Rock Sliders is £15.00
Europe Wide delivery is approx £40.00

 

Call now to place your order on 01252 689586 or email sales@gnvp.co.uk

 

Disclaimer; These items are designed and constructed to fit existing UNDAMAGED sills. If you vehicles Sills are damaged in any way, shape or form, then there may be a chance  that the correct fit and finish will not be achieved. GNVP cannot be held responsible for this. Goods may be returned to us if this is the case, undamaged and at the  purchasers cost. We suggest that any potential purchasers check the condition of their existing sills prior to purchasing by removing the OEM plastic parts as damage can occur to the metal sills underneath without being noticeable until the plastic is removed. It has also been noted that some customers vehicles may not have the requisite number of pre tapped holes in their sills. Although we have fixed these to our own D3’s with 11 fixings, we don’t expect you would have any issues if there are a couple missing each side. You could of course, drill and tap additional holes if required. These products are designed for off  road use only at speeds lower than 15 mph.